|
lind25p [1435]
2500 Ton, 8" Aluminium Extrusion Press with piercer
by Lindemann
Scope of Supply
Manufacturer |
Lindemann |
|
|
Type |
direct / piercer / 4 tie rods |
|
|
Year of Manufacture |
1961 |
|
|
Extrusion force |
25 MN (2500 Mton) |
|
|
Billet |
Ø 218 mm |
|
|
|
Ø 292 mm |
|
|
Container |
Ø 225 mm |
|
|
|
Ø 300 mm |
|
|
Container length |
1.000mm |
|
|
Die changer |
cassette |
|
|
Hydraulic pumps |
3 x Oilgear |
PVV 540 |
|
Main drives |
3 x 200 kW |
|
Electrical control |
Siemens S7 |
|
Oil tank content |
10.000 ltr |
HLP 68 |
|
|
|
|
|
Modernizations: |
2004 complete hydraulic (Oilgear) and electric (Siemens S7) |
Dead cycle time |
21 sec. |
|
Billet heater |
Induction |
|
Manufacturer |
BBC |
|
Type |
OPC 24 L |
|
Year |
1961 |
|
Billet length |
830 mm |
|
Note: |
2008 electrical control was replaced by new one, make IAS |
|
Run-out system
|
|
|
Manufacturer |
Lein |
Unterschütz |
|
Year |
1961 |
2007 |
|
Run-out length |
25 m |
|
|
Hot saw + Single Puller |
|
|
|
Manufacturer |
Unterschütz |
|
|
Type |
flying |
|
|
Year |
New 2007 |
|
|
Stretcher |
|
|
|
Manufacturer |
Lindemann |
|
|
Type |
M 16 |
|
|
Year |
1961 |
|
|
Force |
100 ton |
|
|
Finishing saw |
|
|
|
Manufacturer |
Haginger |
|
|
Type |
Under table |
|
|
Year |
1989 |
|
|
Note |
New control in 2004 |
|
|
Spare parts |
|
|
|
Container |
Ø 225 mm |
3 pcs. |
|
Container |
Ø 300 mm |
2 pcs. |
|
Induction spool |
Ø 225 mm |
2 pcs. |
|
Induction spool |
Ø 300 mm |
2 pcs. |
|
The extrusion press is still installed and under power. The equipment is specially designed for extrusion of hard alloys comprising an in-line solution heat treatment furnace and a quenching unit installed between run-out table and the stretcher. Note: The in-line solution heat treatment furnace and a quenching unit is not included as it is still subject to owners decision. The extrusion press is mechanically in good condition and has got complete new hydraulic and electric equipment in 2004. The press is equipped with a piercer; however, it was not used for tube extrusion in the past. The power of the piercer cylinder will be used for extrusion.
Documents:
pictures  >
(click on main picture to go to the next)
|
|
General
Price indication: Please contact us.
Technical specifications and data are provided by the original manufacturer and/or the actual owners.
ARQ | extrusion-presses.com is not liable for those data. All indications and offers are subject to unsold. Price indications are "as is, where is", unless otherwise precised. Our General Conditions of Sale are applicable unless otherwise agreed.
We can provide highly qualified engineers who may assist you in dismantling, revamping (where needed), reinstalling and recommissioning.
|
|
|
|
|